Table of Contents

WBP1-1

Mechanical Properties of Bulk YBaCuO Superconductor Fabricated Using the Infiltration Growth Technique

13:30-15:00 Dec.3

*Akira Murakami¹, Akifumi Iwamoto², Miryala Muralidhar³

National Institute of Technology, Ichinoseki College, Takanashi, Hagisho, Ichinoseki, Iwate 021-8511, Japan¹

National Institute for Fusion Science, 322-6 Oroshi-cho, Toki, Gifu 509-5292, Japan²

Shibaura Institute of Technology, 3-7-5 Toyosu, Koto-ku, Tokyo 135-8548, Japan³

WBP1-2

Canceled

13:30-15:00 Dec.3

WBP1-3

Modeling an effect of OFC-plates on the trapped field properties for MgB₂ disk bulk sandwiched by OFC-plates during pulsed-field magnetization

13:30-15:00 Dec.3

*Tomoyuki Naito, Tomoki Yoshida

Iwate University

WBP1-4

Flux Pinning and Superconducting Characteristics of Nb₂O₅ Added MgB₂

13:30-15:00 Dec.3

*Gaëtan Simon¹, Muralidhar Miryala¹

Materials for Energy and Environmental Laboratory, Graduate School of Engineering and Science, Shibaura Institute of Technology, 3-7-5 Toyosu, Koto City, Tokyo, 135-8548, Japan¹

WBP1-5

Enhancing Bulk MgB₂ Superconductivity: A Comparative Study of Boron Processing, Silver Addition, and Sintering Methods

13:30-15:00 Dec.3

*Malik Shadab¹, Jacques Noudem², Muralidhar Miryala¹

Materials for Energy and Environmental Laboratory, Superconducting Materials Group, Shibaura Institute of Technology (SIT), 3-7-5 Toyosu, Koto City, Tokyo 135-8548, Japan.¹

Université de Caen Normandie, ENSICAEN, CNRS UMR 6508 CRISMAT, Normandie Univ., 14000 Caen France.²

WBP1-6

Influence of Applied Field Distribution on Magnetic-flux Trapping Characteristics by Changing the Shape of Soft-iron Yoke

13:30-15:00 Dec.3

*Kazuya Yokoyama¹, Tetsuo Oka²

Division of Electrical and electronic Engineering, Ashikaga University, 268-1 Omae-cho, Ashikaga, Tochigi 326-8558, Japan¹

Materials Science and Engineering, Shibaura Institute of Technology, 3-7-5 Toyosu, Koto-Ward, Tokyo, 135-8548 Japan²

WBP1-7

Enhancement of critical current densities and flux pinning of FeTe_XSe_1-X bulk single crystals under high pressure

13:30-15:00 Dec.3

*Ryota Takahira¹, Osuke Miura¹

Department of Electrical Engineering and Computer Science, Tokyo Metropolitan University, Hachioji Asahigaoka 6-6, Hino, Tokyo,191-0065, Japan¹

WBP1-8

Anisotropy of Critical Current Density Properties of the High-performance SS/Ag-sheathed Ba_1-xK_xFe₂As₂ Tapes

13:30-15:00 Dec.3

*Junyi Luo¹, Tatsunori Okada¹, Meng Han², Yanwei Ma², Satoshi Awaji¹

High Field Laboratory for Superconducting Materials, Institute for Materials Research, Tohoku University, Sendai, 980-8577, Japan¹

Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190, People’s Republic of China²

WBP1-9

Enhancing Critical Current Density of (Ba,K)Fe₂As₂ Cu/Ag Composite Sheathed Tapes by Controlling the Ratio of K Element

13:30-15:00 Dec.3

*Wenchao Li^1,2, Chen Guo^1,2, Yanwei Ma^1,2

Key Laboratory of High Density Electromagnetic Power and Systems (Chinese Academy of Sciences), Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, 100190, China¹

University of Chinese Academy of Sciences, Beijing, 100049, China²

WBP1-10

The first kA class transposed cable with Iron-Based Superconducting tapes

13:30-15:00 Dec.3

*Juan wang¹, Chunyan Li¹, Wei Li², Rui Kang², Qingjin XU¹

Central People's Government of the People's Republic of China¹

Institution of high energy physics²

WBP1-11

Preparation and properties of MgB₂ superconducting wires made by decomposing Mg(BH₄)₂

13:30-15:00 Dec.3

Dan Xi, Xinwei Cai, Zigeng Huang, Ruijuan Nie, *Furen Wang, and Zizhao Gan

School of Physics, Peking University, Beijing, China

WBP1-12

Torsion Dependence on Critical Current and In-plane Critical Current Density Distribution of REBCO Coated Conductors

13:30-15:00 Dec.3

*Ryoga Kakurezaki¹, Ayumu Miwa¹, and Masayoshi Inoue¹

Fukuoka Institute of Technology, 3-30-1 Wajiro-higashi, Higashi-ku Fukuoka-city, Fukuoka 811-0295, Japan¹

WBP1-13

In-plane critical current density distribution of REBa₂Cu₃O_y thin film with metal stripe slits

13:30-15:00 Dec.3

*Ginta Utsunomiya¹, Syuuichi Ooi², Minoru Tachiki², Akiyoshi Matsumoto², Masayoshi Inoue¹

Fukuoka Institute of Technology 3-30-1 Wajiro-higashi, Higashi-ku Fukuoka-city, Fukuoka 811-0295, Japan¹

National Institute for Materials Science1-2-1 Sengen Tsukuba-city, Ibaraki 305-0047, Japan²

WBP1-14

Critical currents of superconducting films in the Meissner state exposed to longitudinal magnetic fields

13:30-15:00 Dec.3

*Seiichi Mori¹, Edmund Soji Otabe¹, Yasunori Mawatari²

Kyushu Institute of Technology, Fukuoka, Japan¹

National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Japan²

WBP1-15

Measurement system for Ic of REBCO tapes by pulsed current under pulsed magnetic field

13:30-15:00 Dec.3

*Alexandre Zampa¹, Yuji Tsuchiya², Kenichiro Mizuno³, Yoshimitsu Kohama¹

ISSP, University of Tokyo, 5-1-5 Kashiwanoha, Kashiwa, Chiba, 277-0882 & Japan¹

HFLSM-IMR, Tohoku University, 2-1-1 Katahira , Sendai,Miyagi, 980-0812 & Japan²

MTL Japan, Japan³

WBP1-16

Evaluation of Flux Pinning Properties for Gd₂CuO₄ doped GdBa₂Cu₃O_7-δ Thin Film Fabricated by FF-MOD Method

13:30-15:00 Dec.3

*Junichi Matsuda¹, Ryota Ishii¹, Kodai Sato¹, Seiya Tarumizu¹, Osuke Miura¹

Department of Electrical Engineering and Computer Science, Tokyo Metropolitan University, Asahigaoka 6-6, Hino, Tokyo, 191-0065 Japan¹

WBP1-17

Enhancement of Critical Current Density in Magnetic Fields through the Introduction of Co-doped RE214 Artificial Pinning Centers into Gd123 Thin Films Fabricated by the FF-MOD Method

13:30-15:00 Dec.3

*Seiya Tarumizu¹, Ryota Ishii¹, Junichi Matsuda¹, Kodai Sato¹, Osuke Miura¹

Department of Electrical Engineering and Computer Science, Tokyo Metropolitan University, Asahigaoka 6-6, Hino, Tokyo, 191-0065 Japan¹

WBP1-18

Improvement of Jc by co-doping with Gd214 and BMO (M= Ce, Zr, Sn, Ti) for Gd123 thin films fabricated by FF-MOD method

13:30-15:00 Dec.3

*Ryota ISHII, Seiya Tarumizu, Kodai Sato, Junichi Matsuda, Osuke Miura

Tokyo Metropolitan University

WBP1-19

Critical Current Properties of REBCO Thin Films on Substrate with Zr-stripe of a few µm-width

13:30-15:00 Dec.3

*Yuichiro Shiratsuchi¹, Shinya Sekito¹, Shuya Sakai¹, Yoshiki Tanaka¹, Akiyoshi Matsumoto², Minoru Tachiki², and Masayoshi Inoue¹

Fukuoka Institute of Technology, 3-30-1 Wajiro-higashi, Higashi-ku, Fukuoka-city, Fukuoka, 811-0295, Japan¹

National Institute for Materials Science, 1-2-1 Sengen, Tsukuba-city, Ibaraki 305-0047, Japan²

WBP1-20

Critical Current Characteristics of REBa₂Cu₃O_y Thin Films Deposited on a Zr-formed Substrate

13:30-15:00 Dec.3

*Sekito Shinya¹, Yuichiro Shiratsuchi¹, Akiyoshi Matsumoto², Minoru Tachiki², Masayoshi Inoue¹

Fukuoka Institute of Technology, 3-30-1 Wajiro-higashi, Higashi-ku, Fukuoka-city, Fukuoka, 811-0295, Japan¹

National Institute for Materials Science, 1-2-1 Sengen, Tsukuba-city, Ibaraki 305-0047, Japan²

WBP1-21

A fast T integral formulation toward the calculation of AC loss in large-scale superconducting cables

13:30-15:00 Dec.3

*Xiang Dai, Xiaofen Li

Shanghai Jiao Tong University

WBP2-1

Optimizing the size distribution of preformed BaHfO3 nanocrystals to improve the flux pinning of MOD- REBa₂Cu₃O_7-δ films

13:15-14:45 Dec.4

*Jing Chen^1,2,3, Rongtie Huang^1,2, Zhiyong Liu^1,2, Chuanbing Cai^1,2

Shanghai Key Laboratory of High Temperature Superconductors, Department of Physics, Shanghai University, Shanghai 200444, China¹

Shanghai Creative Superconductor Technologies Co. Ltd., Shanghai 201401, China²

Institute of Materials, Shanghai University, Shanghai 200444, China³

WBP2-2

Continuous Thickness Profiling of HTS Coated Conductors in a Reel-to-Reel System

13:15-14:45 Dec.4

*Insung Park, Gwantae Kim, Hosup Kim, Jeongtae Kim, Hongsoo Ha

Korea Electrotechnology Research Institute

WBP2-3

Deposition Conditions of YBa₂Cu₃O₇-δ Superconducting Thin Films Fabricated by the Reel-to-reel PLD Method

13:15-14:45 Dec.4

*Jeongtae Kim, Hongsoo Ha, Gwantae Kim, Insung Park

Korea Electrotechnology Research Institute

WBP2-4

Nanostructures of superconducting joint between multifilamentary Bi₂Sr₂Ca₂Cu₃O_10+δ tapes based on incongruent melting method

13:15-14:45 Dec.4

*Takeharu Kato¹, Yasuo Adachi¹, Shintetsu Kanazawa², Daisaku Yokoe¹, Junko Ariga¹, Yoshinori Yanagisawa³, Hideaki Maeda³

Nanostructures Research Laboratory, Japan Fine Ceramics Center, 2-4-1, Mutsuno, Atsuta-ku, Nagoya, 456-8587, Japan¹

Graduate School of Engineering, Muroran Institute of Technology, Muroran-shi, 050-8585, Japan²

RIKEN Center for Biosystems Dynamics Research, 1-7-22, Suehiro-cho, Tsurumi-ku, Yokohama, Kanagawa 230-0045, Japan³

WBP2-5

Study on superconducting joining properties of RE-Ba-Cu-O bulk superconductors by controlling oxygen atmosphere and processing conditions

13:15-14:45 Dec.4

*Aadya Shyam Nair¹, Kento Takemura¹, Aaryashree¹, Kazuya Yokoyama², Tetsuo Oka¹, Naomichi Sakai¹

Shibaura Institute of Technology; 3-7-5 Toyosu, Koto-Ward, Tokyo, 135-8548 Japan¹

Ashikaga University; 268-1 Omae-Cho, Ashikaga, Tochigi, 326-8558 Japan²

WBP2-6

Epitaxial Growth and Conductivity of YBCO/LaNiO3/STO Layered Films for Development of Low-Cost REBCO Superconducting Coated Conductors

13:15-14:45 Dec.4

*R. Sakamoto¹, N. Taoka¹, Y. Seike¹, T. Mori¹, Y. Ichino¹

Department of Electrical and Electronics Engineering, Aichi Institute of Technology, 1247 Yachigusa, Yakusa Cho, Toyota, Aichi 470-0392, Japan¹

WBP2-7

Construction of a monitoring system for ablation plumes during YBCO thin film deposition by PLD method

13:15-14:45 Dec.4

*Ryotaro Matsuda¹, Fumiya Sassa¹, Tatsuya Fujita¹, Noriyuki Taoka¹, Yoshiyuki Seike¹, Tatsuo Mori¹, Yusuke Ichino^1,5, Keiichi Horio^3,5, Ataru Ichinose^4,5, Tomoya Horide^2,5, Kaname Matsumoto^2,5 and Yutaka Yoshida^2,5

Dept. of Electrical and Electronics Engineering, Aichi Inst. of Technol., 1247 Yachigusa Yakusa-cho, Toyota, Aichi 470-0392, Japan¹

Dept. of Electrical Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya, Aichi 464-8603,Japan²

Graduate School of Life Sciense and Systems Engineering, Kyushu Inst. of Technol., 2-4 Hibikino Wakamatsu-ku, Kitakyushu, Fukuoka 808-0196, Japan³

Central Research Insitute of Electric Power Industry, Grid Innovation Research Laboratory, 2-6-1, Nagasaka, Yokosuka, Kanagawa 240-0196, Japan⁴

JST-CREST, Japan Sciense and Technology Agency, 4-1-8, Honcho, Kawaguchi, Saitama 332-0012, Japan⁵

WBP2-8

Data assimilation between Monte Carlo simulation and experimental results of crystal growth island density in REBCO thin films during the initial growth stages

13:15-14:45 Dec.4

*Eijiro Okumura¹, Haruto Uchida¹, Takumi Takamura¹, Noriyuki Taoka¹, YoshiyukiSeike¹, Tatsuo Mori¹, Yusuke Ichino^1,5, Keiichi Horio^3,5, Ataru Ichinose^4,5, Tomoya Horide^2,5, Kaname Matsumoto^2,5, Yutaka Yoshida^2,5

Dept. of Electrical and Electronics Engineering, Aichi Inst. of Technol., 1247 Yachigusa Yakusa-cho, Toyota, Aichi 470-0392, Japan¹

Dept. of Electrical Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya, Aichi 464-8603, Japan²

Graduate School of Life Science and Systems Engineering, Kyushu Inst. of Technol., 2-4 Hibikino, Wakamatsu-ku, Kitakyusyu, Fukuoka 808-0196, Japan³

Central Research Institute of Electric Power Industry, Grid innovation Research Laboratory, 2-6-1 Nagasaka, Yokosuka, Kanagawa 240-0196, Japan⁴

JST-CREST, Japan Science and Technology Agency, 4-1-8, Honcho, Kawaguchi, Saitama 332-0012, Japan⁵

WBP2-9

Study of Magnetic Alignment for REBa₂Cu₃O_y Cuprate Superconductors Using Modulated Rotating Magnetic Fields with Sample-Transport-System

13:15-14:45 Dec.4

*Shintaro Adachi¹, Fumiko Kimura¹, Shigeru Horii¹

Department of Mechanical and Electrical Systems Engineering, Faculty of Engineering, Kyoto University of Advanced Science (KUAS), Kyoto, 615-8577, Japan¹

WBP2-10

Fabrication and Evaluation of Bi(Pb)-2223 Films by Aerosol Deposition

13:15-14:45 Dec.4

*Marina Mendoza¹, Shunsuke Omori¹, Yumeng Zheng^1,2, Kotaro Ogawa¹, Kenji Sakai¹, Shinzo Yoshikado¹, Yuuki Sato¹, Ryo Matsumoto³, Yoshihiko Takano³

Graduate School of Science and Engineering, Doshisha University, 1-3 Tatara Miyakodani, Kyotanabe, Kyoto 610-0321, Japan¹

Tokyo University of Science, 1-3 Kagurazaka, Shinjuku 162-8601, Japan²

National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047, Japan³

WBP2-11

Effect of viscosity of the dispersed media on the bi-axial orientation degrees in magnetically aligned Y123 powders

13:15-14:45 Dec.4

*Futo Fukuyama¹, Walid Bin Ali¹, Shintaro Adachi¹, Fumiko Kimura¹, Shigeru Horii¹

Engineering, Kyoto Univ. Adv. Sci., Ukyou-ku Yamanouchi Gotanda-cho, Kyoto-city, Kyoto-prefecture, Japan¹